Custom Headboard

Create a custom look

Custom Headboard

Project Process in steps

Step 1
Remove glass from current picture frames and the centre frame shadow box (enclosed glass front case). Trace the removed glass to determine the shape you need to cut. Using the DSM20 with the DSM500 blade, cut wainscoting for the two side frames.

Custom Headboard
Custom Headboard

Step 2
Using the DSM20 still equipped with the DSM500 wheel, cut plywood for your center, shadowbox.

Custom Headboard
Custom Headboard

Step 3
Draw your center design onto the plywood. Using a DremelĀ® Trio with a TR563 cutting accessory, plunge cut your desired design. TIP: Place rope lighting inside the shadow box to illuminate your design. Use your Trio tool to plunge cut a hole in the back of your shadow box to pass the lights through.

Custom Headboard
Custom Headboard

Other Supplies

  • Picture frame
  • Shadow box
  • Wainscoting
  • Plywood
  • Rope Lighting

Related products

Other Supplies

Other Supplies

Rate this project

http://www.dremeleurope.com/general/en/ocs/project/rate/7685
15
7685
7685
47
1
2
3
4
5
15