Create a stunning Springtime Dining Table

Create a stunning Springtime Dining Table

Project Process in steps

Step 1
Apply self-adhesive copper tape around the edges of +/- forty 20 x 10mm mosaic tiles (for a 30 cm carver plate). Then apply two strips of copper tape around the edge of the carver plate, spacing them 20mm apart. Burnish the tape smooth using a bone folder or the back of a teaspoon. Glue the mosaics around the plate so that the top and bottom edges touch the tapes, spacing the mosaics randomly as shown.

Create a stunning Springtime Dining Table
Create a stunning Springtime Dining Table

Step 2
Then, using the Versaflame and soldering tip, solder around the individual pieces of mosaic, and around the rim twice to cover the copper tape.

Create a stunning Springtime Dining Table
Create a stunning Springtime Dining Table

Step 3
Then, take your Dremel Engraver and engrave lines in between the mosaic tiles, containing them within the border and positioning them randomly as shown.

Create a stunning Springtime Dining Table
Create a stunning Springtime Dining Table

Other Supplies

  • 20 x 10 mm glass mosaic
  • 3/16" self-adhesive copper foil tape
  • Solder containing flux
  • Glass glue
  • Glass carver plates

Other Supplies

Other Supplies

Rate this project

http://www.dremeleurope.com/sa/en/ocs/project/rate/7329
79
7329
7329
279
1
2
3
4
5
79