jump to main content

Chainsaw Sharpening Grinding Stone 4,8 mm (454)

Second to biggest chainsaw sharpening bit. Requires one spacer

Grinding / Sharpening

Product description

What can you do with it?
Sharpen the tooth of the chain.

How to use?
When sharpening a chain saw, sharpen all of the teeth going in one direction, then with the saw in the same position, line the tool up with the second 30° mark and sharpen the teeth that run in the opposing direction. Always try to do the same tooth two or three passes across each tooth. Use the spacers for the best result. They are used to move the pink or orange stones away from the attachment – so they don’t contact the attachment during operation. The pink stone (the largest) requires both spacers. The orange stone (the middle size) requires one spacer. The blue/grey stone does not require any spacers.

Materials to use on:
Chains of chainsaw.

Recommended speeds:
Chainsaw Blade 35000

Attachment
RPM
Chainsaw chain

Packaging Contents

Quantity:
3
Order number
26150454JA
EAN-Code:
8710364044993

technical specifications

Accessory length
50.0 mm
Maximum RPM
30,000 1/min
Shank diameter
3.2 mm
Working diameter
4.8 mm

Usage Information

Durability of accessory:

1 being the lowest and 3 being the highest

Customer also purchased