Step 1

Remove glass from current picture frames and the centre frame shadow box (enclosed glass front case). Trace the removed glass to determine the shape you need to cut. Using the DSM20 with the DSM500 blade, cut wainscoting for the two side frames.

Step 2

Using the DSM20 still equipped with the DSM500 wheel, cut plywood for your center, shadowbox.

Step 3

Draw your center design onto the plywood. Using a Dremel® Trio with a TR563 cutting accessory, plunge cut your desired design. TIP: Place rope lighting inside the shadow box to illuminate your design. Use your Trio tool to plunge cut a hole in the back of your shadow box to pass the lights through.