Jewellery is always a wonderful gift for friends and family. When designed and personalised it creates double the joy of receiving jewellery. Use our Dremel 7750 to help create unique jewellery perfect for yourself or loved ones.
Step 2: Sketch
The easiest way is to record the dimensions of the jewellery and then sketch the jewellery out, then sketch on the desired pattern. So you'll see how it looks and if it fits.
Step 3: Transfer design
With a thin permanent marker you can now draw your desired design on the earring.
Step 5: screw on multi chuck
The multi-chuck (4486) is great for clamping the various tools. You do not need a key to tighten the multi-chuck but it can be tightened with your hands.
Step 6: Engrave
Be sure to put on gloves and place the jewellery on a non-slip mat. Now you can trace the marker and start to engrave with the tool.
Step 7: Engraving continued
Do not apply pressure to the work piece or machine. To make the lines thicker just go over them again until at the desired thickness.
Step 8: Finished Earrings
Acetone can be used to clean up any remains.
Step 9: Bracelet
For the bracelet we took a diamond engraving point. It is ideal for very thin lines.
Step 10: Trace and fill out
With a diamond cutter 2 mm (7103) you can then fill-in all surfaces and bring in more depth.
Step 11: Remove excess
As with earrings, remove the remainders of dust and permanent marker with acetone or nail polish remover if you have any.
Step 12: Finished!
YOU MIGHT ALSO BE INTERESTED IN