jump to main content


With this individually designed clapper you can show your country’s colours and support it stridently in the soccer World Cup or at the Winter Olympics. Make your own personal fan kit together with your family, friends and neighbours and do something with the time that leads up to the action. All you need is your enthusiasm and the right Dremel® tools.

projectpicture for step1

Step 1

Press the hand template onto an A3 sheet of paper and transfer the outlines twice with a pencil and tracing paper onto to a multiplex sheet. Fix the Multipurpose Cutting Kit (565) to a Multi-Tool like the Dremel® 4200 and carefully cut out the two hands.

projectpicture for step2

Step 2

Sand the edges of the hand and the handle smooth with the Multi-Tool and EZ SpeedClic sanding bands (SC407). Your noisemaker will then fit neatly and comfortably into hands large and small and even small children will be able to fire their favourites on with a shake and a clap.

projectpicture for step3

Step 3

Now is the time to show your colours. Spray first one side of the hand in your country’s colour(s) and leave it to dry well. Then spray the other side so that your clapper will be both a noisemaker and an eyecatcher.

projectpicture for step4

Step 4

Your Dremel® 4200 is back in action in Step 4. Draw two holes on the base of a hand as shown and fix the multipurpose spiral cutting bits (561) to your Multi-Tool. Then lay the other hand underneath and drill the two holes through them both.

projectpicture for step5

Step 5

Wind tape round the handles, starting at the lower end and making sure that the edges always slightly overlap and there are no gaps. Secure the ends with duct tape.

projectpicture for step6

Step 6

Push a pencil between the two hands as a placeholder and thread the cord through the holes you have drilled. Tie a firm knot and your noisy clapper is ready to go! All you now have to do is clap for all you are worth to support your team!

related products

Other supplies


Tracing paper

Soft brush