jump to main content

Cut-Off Wheel 32 mm (540)

For straight cuts in metal

Cutting

Cut-Off Wheel 32 mm (540)

Product description

What can you do with it?
Good for slicing, making straight cuts and slots in all kinds of metal, like hardened steel, sheets metal or aluminum.
Easily cut bolts, or make slots in rusted and/or stripped bolts / screws for removal with a screwdriver.


How to use?
Use with 402 Mandrel: unscrew the top screw on the mandrel using the wrench, put the screw through the middle hole of the disk and screw it back on the mandrel.

If using the metal cutting wheels, cut on high speed – use light pressure. The wheels will last longer and cut faster if light pressure is used rather than heavy pressure and there is less risk of breaking it.
Since these disks are abrasive, the diameter of the wheel is going to wear away. If the wheel becomes too small to execute the cut, stop the cut and replace the wheel.

When using a cut-off wheel, we recommend using a two handed golf like grip to hold and guide the tool and go for a right angle. If you angle the wheel in the cut, the wheel will probably break.
Materials to use on

This cut-off disk can be used on different metal types, like aluminum, copper, cast iron. But also for short cuts in plastic or brick.
On materials like a galvanized metal (Ductwork) or hardened steel, it’s best to use reinforced cut-off wheel (426)

Recommended speed

Aluminium 35000
Brass 35000
Copper 35000
Plastic 10-15000
Steel 35000

Mandrel
RPM
Aerated Concrete
Aluminium
Brass
Brick
Cast iron
Copper
Drywall/Plasterboard
Glass fibre reinforced plastics
Gold
Hardened Steel
Marble
Plastic
Silver
Soft Metal
Stainless Steel

Packaging Contents

Quantity:
5
Order number
2615000540
EAN-Code:
8710364010516

technical specifications

Max working depth
14.0 mm
Maximum RPM
35,000 1/min
Shank diameter
3.2 mm
Working diameter
32.0 mm

Usage Information

Durability of accessory:

1 being the lowest and 3 being the highest

Mandrel to be used:

Mandrel (402)

Customer also purchased