jump to main content

DREMEL® EZ SpeedClic: Sanding Discs (SC413)

Easy to change disks for flat and edge sanding of e.g. wood

Sanding

EZ Speedclic
DREMEL® EZ SpeedClic: Sanding Discs (SC413)

Product description

What can you do with it?
Common uses for the Dremel sanding disc include smoothing and shaping wood or removing paint. is great for (smooth) flat and edge sanding of soft materials such as wood and fiberglass Dremel sanding discs have a finer grit than Dremel sanding bands. Also used for rust removal
The lower the grit, the more material removal.
The SC411 (grit: 60) and SC 411 (grit: 240) are from the Dremel Exclusive EZ Speedclic family. This makes accessory changes easy as PULL - TWIST - RELEASE.


How to use?
These discs are best used with the Dremel tool facing towards the work piece, and are flexible to accommodate for any curves on the project. We recommend using mainly the center of the disc for maximum results.

Sanding discs will wear out and are replaceable by removing the mandrel.
Materials to use on

These disks can be used to sand / smooth softer materials like hardwood, softwood, plastic, fiberglass, aluminum but also for rust removal of metal types, like steel.
Can shape rubber surfaces

Recommended speed

Hardwood 10-35000
Softwood 10-35000
Aluminium 35000
Brass 35000
Copper 25-35000
Plastic 10-20000

Mandrel
RPM
Aluminium
Brass
Chipboard
Copper
Fiberboard
Hardwood
Laminates
Metal pipes
Plastic
Plywood
Sandwich material
Soft Metal
Softwood
Steel-general
Veneered woods

Packaging Contents

Quantity:
6
Order number
2615S413JA
EAN-Code:
8710364060931

technical specifications

Grit
240
Shank diameter
3.2 mm
Working diameter
30.0 mm

Usage Information

Durability of accessory:

1 being the lowest and 3 being the highest

EZ SpeedClic

Customer also purchased